Multilanguage Developer Tool for Vocom V4 FH Version 2.03 Support
Max Speed limit Dev2tool Developer Tool
Detailed Product Description
PTT 2.03 vocom 3.0 Developer Tool For PTT 2.03 Development Model
developer tool software used together with PTT2.03 will allow you
to program 11500 parameters using
standard 88890020 and 88890300/88840133 usb diagnostic interface.
(speed programming, injectors programming, change CHASSIS ID ,
dissable immo , trip kilometers correction and fuel consumption
saved in ECU , ........... )
Please note: be sure your hardware is: 88890020 and
88890300/88840133 original, currently don't support 9998555
hardware.
Install Way:
we send software hard disk for D630 Laptop and you could insert the
hard disk to your laptop.
It could use directly when you get it.
This hard disk inculd PTT 2.03 software with Developer Tool for PTT
development model.
Dev2tool.exe Premium Tech Tool PTT Development Model vocom Super
Programming Software
Premium Tech Tool developer tool
Super Programming Software Premium Tech Tool software with PTT
software in development model
Premium Tech Tool PTT Development Model with developer tool
software
We will also open the PTT software into Development Model for you.
Truck Excavator Super Programming Software Premium Tech Tool
dev2tool.exe software
Premium Tech Tool developer tool
1. Dealer tool to access and program parameters in Level2 and
Level3 without connecting to central severs;
2. Works with Tech Tool (vocom Pro), Normal or Development mode,
support 28 languages;
3. Support all brands and models supported by Tech Tool (vocom
Pro);
4. Make programmable more than 11000 parameters.
5. Program speed limit, change chassis ID, disable immobilizer;
6. Change minimum/maximum values of parameters, for example:
increase speed limit;
Premium Tech Tool (PTT) is an application for the Aftermarket,
developed to support efficient service and diagnostics. Premium
Tech Tool is available as a connected version or as an unconnected
version. The unconnected version is called Premium Tech Tool
Connectionless (PTTC) and that is that we offer. PTTC is used in
workshops that do not have internet access, but both versions are
referred to as PTT. PTT provides access to the Guided Diagnostics and vocom.
Test Function:
1-Service and maintenance
2-Engine, Engine mounting and equipment
3-Electrical system and instruments
33311-3-Preheat, Test
33445-3-Ignition Switch, Test
36303-3-Intermittent Wiper, Test
36415-2-Switch Lamp, Test
36421-3-Position Switch Back-up(Reversing) Lamp, Test
36423-3-Lever Switch High Beam/Low Beam, Test
36424-3-Stalk Switch Direction Indicator, Test
36491-3-Steering Wheel Buttons, Test
36603-3-Anti-theft Alarm Status, Test
36607-3-Logged anti theft alarm activation, read out
36614-3-Load Indicator, Test
36622-3-MID 163-Transponder Reading, Test
36624-3-MID 163-Key Counting, Test
37173-3-Data Links, Fault Tracing with Oscilloscope
38117-3-Instrument Cluster, Test
38118-3-Gauge Checks, Instrument Cluster
38356-3-Calibration Number, Test
38440-3-Brake Contacts, Test
39203-3-Audio Unit Function Test
39746-3- Link, GPS, Test
39747-3- Link Satellite Communications Test
4-Transmission
40001-3-Starting gear selection, read out
40005-3-Range Inhibitor, Test
40010-3-Clutch Cylinder, Test
40012-3-Gear Selector Position Sensor, Test
40015-3-Range Cylinder, Test
40016-3-Split Cylinder, Test
40020-3-Gears, Test
40023-3-Transmission Speed Sensor, Test
40024-3-Oil Sensor Signals, Test
40025-3-Solenoid Valves, Test
40026-3-PWM valves clutches and brakes, test
40027-3-PWM Valves Main Pressure and Brake Pressure, Test
40028-3-Lockup and Retarder, Test
40083-3-PWM Valves Clutch, Test
40087-3-Pressure Sensor, Test
40091-3-Gear Activation, Control Housing (for Removal/Replacement)
40098-3-Gears, Check Oil Pressure, Test
40112-3-Gear Selector, Test
40145-3- Solenoid Valves Measuring, Test
40170-3-Inhibit Cylinder, First Gear, Test
41126-3-Clutch Wear Check, Test
41180-3-Clutch Drag, Test
41181-4-PWM Valves Clutch Activation, Test (Transmission Removed)
41182-3-PWM Valves Clutch Activation, Test
43116-4-Gears, Test (Transmission Removed)
43121-3-Gear Selector Cylinder 1/Reverse, Test
43122-3- Gear Selector Cylinder 2/3, Test
43126-3-Counter Shaft Brake Solenoid Valve Test
43128-4-Solenoid Valve, Brake Counter Shaft, Test (Transmission
Removed)
43194-3-Input Signals for Gear Selection, Test
43773-3-Vehicle Inclination Sensor, Test
48141-3-Power Take-off Pressure, Clutch, Check
5-Brakes
50006-3-Brake Pads, Test
50011-3-Modulators, Test
50012-3-Foot Brake Valve, Test
50013-3-TCS Function Shut off, Test
50016-3-Wheel Speed Sensor Signal Voltage, Test
50017-3-Foot Brake Valve Signal Voltage, Test
50020-3-Wheel Speed Sensor, Test
50021-3-Brake Adaptation
56023-3-Pneumatic System, Status
56186-3-Air Dryer Solenoid Valves, Test
56362-3-Parking Brake Switch, Test
59110-3-Control Auxiliary Brake, Test
59221-3-Pressure Setting Retarder, Test
59222-3-Function Retarder, Test
59242-3-PWM Valve Retarder, Test
59297-3-Temperature Sensor, Test
59302-3-Wheel Speed Sensor ABS, Test
59303-3-Tooth Wheel ABS, Test
59305-3-Solenoid Control Valves, ABS, Test
59306-3-The ABS Control Unit, Test
59318-3-Foot Brake Valve Backup, Test
59364-3-EBS Control Unit Input / Output Signals Status, Test
59371-3-ESP Function Switching On and Off, Test
59376-3-Activate ABS Valve, Test
6-Axles, suspension and steering
64538-3-Control Valve, Test
64720-3-ECU, Electronically Controlled Hydraulic Axle Input Output
Status, Test
7-Frame, springs, shocks and wheels
72873-3-External Signals to ECS, Test
72874-3-Control Box, Test
72875-3-Pressure Sensor, Test
72876-3-Level Sensor, Test
72877-3-Solenoid Valves, Test
72880-3-Lift Axle Switch, Test
72885-3-Air Suspension System Module In-Output Signals Status, Test
72887-3-ECS System status, test
72905-3-Additional Functions ECS, Parameter Test
72928-3-Verify Level Sensor Calibration, Test
77601-3-Tire Pressure Monitoring Truck, Test
77615-3-Tire Pressure Monitoring Trailer, Test
8-Body, cab and interior
87518-3-Parking heater timer, readout and resetting
9-Miscellaneous
93003-3-Bodybuilder Module Input / Output Signals, Test
Calibrate
1-Service and maintenance
2-Engine, Engine mounting and equipment
3-Electrical system and instruments
4-Tansmission
5-Brakes
6-Axles, suspension and steering
7-Frame, springs, shocks and wheels
8-Body, cab and interior
9-Miscellaneous
Program
1-Service and maintenance
2-Engine, Engine mounting and equipment
3-Electrical system and instruments
4-Tansmission
5-Brakes
6-Axles, suspension and steering
7-Frame, springs, shocks and wheels
8-Body, cab and interior
9-Miscellaneous
Communication Unit
VOCOM/88890020/88840133
Supported Protocols
SAEJ1939, ISO15765, SAEJ1587
vocom Pro Development Content
