1. Protect Original Car Parts
More than 98% of ECUs support BENCH mode and OBD mode, no need to
open the cover and punch holes to protect the original car. |
2. Intelligent Recognition
The "identification" function can help users better diagnose
whether the ECU module is communicating and check whether the
wiring is wrong. If the ECU module can communicate without damage
and the wiring is correct, the recognition can be successful, and
the chip information, hardware information and firmware information
can be read out. |
3.Module Clone
Supports ECU data reading and writing and module cloning, no
synchronization matching, no online programming, data sub-regional
burning, automatic verification, and maximum protection of chips
and modules. |
4. ISN Read and Write
Supports engine computer ISN code acquisition for all BMW series
(including Mini), which is convenient for key matching and
anti-theft maintenance.
Check
FC200
BMW ISN Read and Write List |
5.VIN modification
Solve the problem of double VIN or VIN mismatch of vehicles, which
is convenient for vehicle maintenance. |
6. Data Processing
Support engine computer data analysis and modification for
Audi/Seat/Skoda/Volkswagen models;
Support the shutdown of Bosch MED/EDC17 series engine computer
anti-theft system;
Support the TPROT off function of Bosch VAG MEDC17 series, BMW/Mini
MEVD17/EDC17 series, Hyundai/Kia EDC17/MED(G)17 series. |
7. FC200 not only support BMW ECU but also support over three
thousands of ECUs like KTAG, Kess, Dimsport etc.
Check
FC200 Support ECU List
|
| 8. For Checksum Function, Please Check
FC200 Support Checksum List for Reference. |
9. There are 3 Operating Modes: CAN-BUS, Bench Mode and Boot Mode
|
10. Multi-Language: English, French and Simplified Chinese
For Spanish, Polish Turkish and Traditional Chinese, will need to
pay
$130
Language Change Service to get authorized seperately with serial number. |
11. Support BOSCH MPC5xx platform mode ECU: MED9.1, MED9.5,
MED9.5.10, ME9.0, EDC16CP31, EDC16CP35, EDC16C2, EDC16C8
Need to buy extra
FC200 MPC5XX Adapter
|
12. Full Version with All License Activated.
Free Update Online for One Year.
Annual
Fee will be $200/year after the first year. |
Notice:
FC200
Software Free Download Link, please download here when you get the package.
Here is
User Manual for your reference too.
FC200 Latest Update Information:
CG FC200 V1.1.9.0 Registered Version (2024.03.23)
1. Add BOSCH ST10 ECU and add verification function:
Abarth: ME7.9.10
Alfa Romeo: ME7.9.10, MED7.1.1
Audi: ME7.5.30, ME7.5, MED7.5.10
Bentley: ME7.1.1
BMW: ME7.2
Chery: ME7.9.7, M7.9.7, ME7.9.71
Chrysler: ME2.8.1
Peugeot Citroen: M7.4.4, ME7.4.4, ME7.4.9, ME7.4.6, VALEO_J34P
Ferrari: ME7.1.1
Fiat: ME7.9.9, MED7.6.2, ME7.9.10, MED7.1.1, VALEO_J34P
Geely: M7.9.7
Honda: ME7.9.7, ME7.9.3
Hyundai Kia: M7.9.7, ME7.9
Lancia: MED7.6.2, MED7.1.1, ME7.9.10
Maserati: ME7.1.1
Mercedes: ME2.8, ME2.8.1
Mitsubishi: ME7.7.1
Opel: ME7.6.4
Polaris: M7.9.7
Porsche: ME7.5, ME7.8.1, ME7.2, ME7.8
SAIC: ME7.8.8
Volkswagen Seat Skoda: MED7.5.10, ME7.5.30, ME7.5
Toyota: ME7.9.5
vocom: ME7.0, ME7.0.1
2. Added DENSO ECU:
Mazda: DENSO
R2AA/R2AB/R2AC/R2AJ/R2AK/R2AW/R2AX/R2BG/R2BP/R2BR/R2BS, DENSO
RF7x/RF8x
Hyundai/Kia: DENSO 33910-05005
Suzuki: DENSO 33920-67P0
3. Other new ECUs:
Chevrolet/Holden/Opel: DELPHI DCM3.7AP
Suzuki: ME17.9.64
Ford: MG1CS017
4. A new button for "Vehicle Fault Code Support List" is added to
the main interface.
BUG FIXED:
1. Fix the problem of EEPROM reading error in
ME7.5.20/ME7.5.10/ME7.5 and other ECUs
2. Fix the problem that some ECUs such as DQ380/1 report a program
error when writing after verifying PFlash.
3. Fixed the problem of failure to modify VIN in new versions of
Mercedes-Benz MED17.7.3/ME17.7.7 and Volkswagen
MED17.5.25/MED17.5.5 models.
V1.1.8.0 Registered Version (2024.02.01)
1. Added Hyundai/Kia TCU: TC60.x.x
2. M7/ME7/M17 ST10F725/6 ECU adds the function of turning off the
anti-theft system
3. GM E80 adds BOOT mode
4. BMW's new ECUs: MEVD17.8.4, ME17.2.42
5. Peugeot/Citroen MED17.4.2 TC1767 new platform mode
6. EDC17C84 adds the function of modifying VIN
BUG FIXED:
1. Fix the problem that some MD1CS089 cannot start the car after
reading and writing data.
2. Fix the problem of Mercedes-Benz 9GT TCU cloning failure
3. Fix the problem of failure to write PFlash in GM 6T/6L gearbox
4. Fix GPEC2A and other unrecognized problems
5. Fix the problem that some ECUs such as EDC16C1 and EDC16CP35
fail to write to ExtFlash.
6. Volkswagen MED9.1 MPC563/4 supplementary wiring diagram
7. Hyundai/Kia EDC17CP14 corrected reading password wiring diagram
8. Volkswagen MED17.5 platform mode supplements other wiring
diagrams
9. IVECO EDC17C69 supplementary wiring diagram
FC200 V1.1.7.0 Registered Version (2023.11.24)
1.Add vocom Electric Equipment ECU: MB279700-9500, MB279700-9801,
MB279700-9811
2.Add Audi ECU: Simos8.4x, Simos12.x
3.New Hyundai ECU/TCU: SIM2K-240_ ECU, SIM2K-341_ TCU
4.Fix issues with some ECU cloning failures:
MED17.3.1/MED17.7.2/MED117.7.3/MED17.5.5 and general Exx series,
etc
5.Fix the issue of some universal ECU recognition failures:
E78/E39/E39A/E80, etc
6.Lovol added ECU: EDC17CV43
7.BMW adds ECU: MEVD17.8.4
8.Added ECU for PFlash verification algorithm: MSV90, SID807EVO,
EMS3110, SIM2K-240_ ECU, SIM2K-341_ TCU, Simos12. x, Simos8.4
9.Add and modify ECU for VIN: CPGDSH1.21.6, CPGDSH2.2x. x
10.Optimize the PFlash verification algorithm for DQ380
11.Fix some bugs and optimize software performance
Functions of Each Adapter:
1. MSV90 Adapter:
This adapter supports ISN reading and writing and data backup and
recovery of BMW MSV90
2. N20 Adapter:
This adapter supports ISN reading and writing, VIN modification and
data reading and writing functions of the N20 and N13 of the F
series chassis of BMW
3. B48/B58 Adapter:
This adapter supports ISN reading and data reading and writing
functions of BMW models: MG1CS003, MG1CS024 and MG1CS201.
4. 271KE Adapter & 271DE Adapter:
These two adapters support the data backup and recovery functions
of Mercedes-Benz SIM 271KE and SIM 271DE
5. 6HP & 8HP Adapter:
The adapter is used for the data backup and recovery function of
the 6HP and 8HP EGS of BMW models.
FC200-MPC5XX-P02-M230102 Adapter for BOSCH MPC5xx Read/Write Data
on Bench
Description:
CG FC200-MPC5XX-P02-M230102 adapter can be used for MPC5X series
clone without opening cover.
Product Functions:
Supported ECU Models: ME9.0, MED9.1, MED9.5.10, EDC16C2, EDC16CB,
EDC16CP31, EDC16CP35. More models are being upgraded.
Product Features:
Adaptation without disassembly
Stable and safe
Function extension
Data loss prevention
Real-time monitoring
Solid connection
Package List:
1pc x CGDI FC200 Host
1pc x OBD Cable
1pc x Jumper
1pc x USB Cable
6pcs x G-type Adapter Cable
3pcs x F-type Adapter Cable
6pcs x E-type Adapter Cable
6pcs x D-type Adapter Cable
6pcs x C-type Adapter Cable
6pcs x B-type Adapter Cable
FC200 Adapter Set
including: 6HP & 8HP, MSV90, N55, N20, B48/B58, B38, 271KE Adaper,
271DE Adapter
1pc x CG FC200-MPC5XX-P02-M230102 Adapter
